Written by Acrylic Nails

Can You Use Any Monomer With Your Acrylic Powder?

mixing acrylic powder with gel

For years, acrylic powder has been a mainstay in many nail salons, and these products will elevate your manicure to new heights. You’ve undoubtedly heard that mixing acrylic materials, such as a powder from one brand and a liquid from another, isn’t a good idea. But does it genuinely make a difference, or is it merely a manufacturer’s overly cautious suggestions? Liquid-and-powder solutions comprise two components that must be correctly matched and combined in the right proportions to obtain the intended outcomes. Women are always curious about mixing different brands because there are so many different powders and monomers available, and these products come in such a wide range of prices.

What Happens When You Mix Monomer And Acrylic Powder?

Acrylic’s ability to work is due to chemistry. A chemical reaction occurs when you combine liquid and powder, causing the two distinct elements to mesh flawlessly, resulting in a powerful and valuable medium. Monomers, stabilizers, cross-linkers, and catalysts are found in the liquid, whereas polymers, copolymers, initiators, and colorants are present in the powder. A brand will make a liquid and powder with the perfect chemical balance for the two halves to operate together. You can’t assume that outside brands’ recipes are the same so that you can wind up with too little or too much of one component.

Each liquid has a certain amount of DMT (Accelerator, Promoter, Activator) to match the amount of Catalyst (BPO, Benzoyl Peroxide) spread over the polymers. If the DMT and BPO ratios are incorrect, slower or quicker polymerization can occur. Polymerization shrinkage, which produces lifting, occurs when a product sets too quickly. On the other hand, a product that sets too slowly due to poor formulation does not fully polymerize before the tech begins filing. The unset product may be pulled microscopically as a result of this.

Additionally, too much initiator might cause your upgrades to become brittle or become yellow. Your monomer may not react entirely if you use too little initiator. If you use it on your nails, the unreacted monomer can soak through the nail bed, causing discomfort and an allergic response. On a practical level, you won’t be able to troubleshoot with the manufacturer if and when you have issues with your product.

Can You Mix Any Monomer With Acrylic Powder?

Yes, you may mix and match nail products from various brands. Mixing and combining products from various nail brands is unlikely to result in any volatile results. Experts, on the other hand, advise against it. The wrong mix of liquid and powder and the inappropriate ratios used by people are the primary reasons for service failure and severe skin responses. You must use all products correctly and in line with the instructions provided by the manufacturer. It would not be suitable to mix the wrong polymer powder with a monomer liquid.

However, if you have blended one company’s monomer with another’s powder and the combination has consistently proved stable, you’re good to go! It’s essential to remember that not all nail solutions and powders are made equal. As a nail technician or a user, you should think about what quality standards are essential to you, what you enjoy, and what works best for your clients or you.

Conclusion

As a result, you can theoretically mix nail products from several manufacturers. Because introducing a product that is not theirs restricts their capacity to help you solve if and when difficulties arise, such as your acrylic lifting, companies cannot promote mixing and matching products. However, you know what you need to do deep down. You are responsible for your happiness, and being “semi-happy” is not a long-term solution. Use the products you’ll need to make the gorgeous mani you’ve been dreaming of for a long time.

More Articles On Acrylic:

(Visited 1,131 times, 1 visits today)
Close