Written by Polygel Nails

How To Dry Polygel Without UV Light?

Polygel is a hybrid of rigid gel and acrylic. It has gained immense popularity among DIY lovers because of its simplest application process. It does need UV light to cure. But what if you don’t have a UV lamp and you want to cure polygel? Let’s find out.

Is It Possible For Polygel Nails To Dry Naturally?

Polygel has become increasingly popular due to its quick drying time and longer wear time. While Polygel can keep your nails looking great for weeks, curing the varnish with UV light may be detrimental to your health.

Although Polygel doesn’t get dry on its own, alternative cure methods need minimal UV exposure. Other ways, such as applying a non-UV Polygel paint, adding a drying solution, or dipping your nails in icy water, may work but not as effectively as a UV light.

The incredible thing is that frequent manicure users are less prone to have any side effects than those who use a typical UV beam. This kind is safe even when curing hues like pink or red without turning them entirely white since they produce heat instead of radiation like their cousins. As a result, LED lights are a less expensive, healthier, and more effective alternative to UV lamps.

How Much Time It Takes For Polygel To Dry?

The Polygel cures in 30 seconds with an LED light, and with a UV light, it cures in 3 mins. Over-curing Polygel is conceivable. Some Polygels will discolor and lose their luster if they are over-cured, whereas others will do both or neither. It is when the Polygel and the drying light come into action. Each manufacturer should inform the nail technician of the potential consequences of over-curing the product.

How Long Will Polygel Nails Take To Dry Without UV Light?

Another method for curing gel nails if you don’t want to use UV lights for safety concerns is to get an LED nail lamp. It’s the only method to get Polygel to dry similarly. Polygel will take several hours, even days, to cure without UV or LED lamps. I will urge you to buy a long-lasting UV lamp or Led lamp for curing Polygel nails if you plan to keep your manicures perfect.

How Can You Dry Polygel Without Using UV Light?

Use a quick-drying nail paint spray on freshly painted nails.

Place one of the palms on a level surface covered with toilet paper or newspapers.

Hold the can at a slight distance from your hands and spritz a light amount over your nails while the Polygel is still wet.

Using your second hand, spray the nails in the same manner. Allow your fingernails to dry for many hours.

Once the varnish has dried and set, wash both hands with warm water and soap to remove any residual spray.

While quick-drying mists are for non-gel nail paints, they may help Polygel lacquer cure.

Moment of Truth

The only method to cure Polygel correctly is using an LED bulb without using a UV lamp. The only UV lamp replacement on the market right now are LED lamps.

UV lamps include UV light bulbs that emit UV rays, causing the photopolymers in Polygel to solidify. LED lights, however, have multiple UV-emitting LEDs.

These UV lasers are suitable for Polygel curing. With an LED light, Polygel cures significantly faster than with Ultraviolet light. A UV light cures Polygel in 120 seconds; however, most LED lights cure Polygel in 60 seconds. Just ensure the gadget has a minimum of 36 watts of power.

The Best Process To Dry Polygel Without Using UV Light

Here is a step-by-step guide.

✔️Ensure Your Nails Are In Good Shape

Cuticles should be pushed back, and long nails should be filed down gently. Any previous coatings, like acrylics or gels, should be removed. Hands should be wholly cleansed and dried or sanitized. Lightly buff the nail surface to remove the gloss. Remove any filing dust from the nail plate. The natural oil and moisture in the nail are removed with a nail dehydrator. Use a nail primer to improve the adherence of your Polygel manicure.

✔️Begin By Putting On The Base Coat

Apply one coat of Polygel base coat and cure under LED light for 30 seconds. To minimize heat spikes, utilize a low wattage setting if your lamp has one. Don’t brush away the stickiness after curing.

✔️Make Use Of Polygel

Polygel from the tube onto your nail, or spread it across the dual forms and place the form on your nail.

✔️Curing

Set the timer for 60 seconds and place your fingers beneath the light. After placing the hand beneath the light for 60 seconds, wait for the Polygel to dry. Usually, you will not experience any heat spikes. Give this another 30-60 seconds to cure if your light is poor and the Polygel hasn’t completely dried. File and buff your Polygel nails to perfection after removing the dual form.

✔️Apply The Final Paint Layer

Apply a single coat of topcoat and cure it for 30-60 seconds under the lamp. Brush away the sticky layer if required.

You’ve finished the job!

Conclusion

Polygel can be cured using lower-powered machines, but it will take longer. Because Polygel rarely causes heat spikes during the curing process, you should not avoid high-power units. UV light bulb units have been mainly replaced since LED lights are an adequate and popular substitute.

These polishes were not LED-curable because UV lamps produce a more comprehensive range of UV wavelengths than LED units. However, almost all modern products are LED-curable because of a reformed formulation. LED lights are more mobile and simple to use. As a result, using an LED light rather than a UV lamp to cure Polygel is optimal.

(Visited 654 times, 1 visits today)
Close